|
Lifeline Acrylic
Enhance Your Interior with a Clear "Furniture-Grade" Finish
We proudly offer Lifeline Acrylic Satin & Acrylic Gloss premium clear coats for the interior of your natural wood home. There is no better way to dramatically enhance the beauty of your walls, ceilings, beams, millwork and cabinetry.
Lifeline Acrylic Satin & Acrylic Gloss are water-borne, so they can provide the toughness, clarity and durability of polyurethane - without the mess or offensive odor. Their special formulas are a delight to work with and simply glide onto the wood. You’ll get more done with better results than with other competitive finishes.
Choose Lifeline Acrylic Satin or Acrylic Gloss for the lowest-maintenance solution for the interior of your home.
• Non-Yellowing
• Won’t Crack or Peel
• Environmentally friendly
Free samples are available upon request. Contact one of our Locations. |
Lifeline Acrylic Specifications
Shelf Life |
|
Application Temperature |
|
Application Methods |
- Airless Sprayer
- Brush
- Sponge
|
Surface Preparation |
- Seal with Lifeline Interior
|
Frequency |
|
Drying Time |
- Dry to the touch in 1 hour. Can be sanded in 4 hours.
|
Special Instructions |
- Number of coats depends on the amount of sheen
desired
|
To view and/or print MSDS sheets or labels you need Acrobat Reader. If you don't have Acrobat Reader installed on your computer,
click here
for a free download.
| Coverage Rate per Gallon |
One Coat on Bare Wood |
350-450 square feet |
One Coat on Sealed Wood |
600-800 square feet |
|
Lifeline Acrylic Application Instructions
(Printer Friendly Version Here)
Acrylic Gloss or Satin is an excellent finish for highlighting interior log walls, cabinets, paneling, timbers, trim, railings and other vertical wood surfaces. The resilient acrylic polymers in Acrylic Gloss and Satin help protect water-based stains, paints and sealers from abrasion, wear and water damage. The smooth finish provided by Acrylic Gloss or Satin makes woodwork easier to clean.
Note: For floors and other horizontal wood surfaces we recommend the use of Sure Shine™ Interior Floor Finish.
Application Tips
- If you choose not to use a pigmented interior stain, first seal the wood with
LIFELINE Interior Clear. This will
reduce your overall cost while providing an excellent surface for subsequent
coats of Acrylic Gloss and Satin.
- Stir well before use. Try to avoid shaking the container since entrapped air bubbles are difficult to brush out.
- Apply multiple coats for a deeper looking finish.
Application Instructions
Surface Preparation: Surfaces should be clean, dry and free
of all loose particles, dust, mold and mildew. If the surface is sealed or
stained with LIFELINE INterior, less Acrylic Gloss or Satin will be required to
obtain a smooth, bright finish. Do not use over recently applied oil-based
finishes.
Coverage: One gallon of Acrylic Gloss or Satin will cover 350
to 450 square feet of hand-hewn logs or timbers or 450 to 600 square feet of
smooth logs or millwork. Do not thin Acrylic Gloss or Satin with any solvent
including water.
Application: Stir well before using. Apply an initial coat to
previously sealed wood surfaces using a brush or airless sprayer. Immediately
brush out runs and sags. If subsequent coats are desired, allow the first coat
to completely dry and then lightly sand using 180 to 220 grit sandpaper. Do not
use steel wool or wire brushes! Subsequent coats will not require sanding
between coats.
Clean-up: Clean spills, tools and work area with clean water
before the finish has dried.
Storage: Store Acrylic Gloss and Satin out of direct sunlight
and protect from freezing. Although Acrylic Gloss and Satin are freeze-thaw
stable, if the product is accidentally frozen, allow to thaw and check for
suitability of use before applying.
© Perma-Chink Systems, Inc. 04/2007 |
|
